A:The product says all
The bore plank reduces expenses device, pass three the valve set with differ to press to change to send to a machine to do a perfect close combination, but constitute the integral whole type bore plank flowmeter.
The integral whole turns the bore plank flowmeter, can be apply in petroleum,chemical engineering,natural gas,metallurgy,electric power and make a medicine extensively etc. profession in, various liquid,air,day the spirit and the physical volume discharge of the steam or the continuous diagraph of the quality discharge.
Two:Product characteristics
The integral whole turn type structure, take to press to take care of short and have no to leak to order, install convenience, the structure tightly packed, reduce signal to deliver of delay, correspond speed quickly, take to press balance, have no zero:00 error margin, use to differ to press scope widely, the least differs to press only for the 30 mmHs 2 O pillar, the piping caliber applies scope greatly, the piping can reach to a 1000 mms or larger, measure accuracy is high, the scope degree breadth, and can expand, bear heat,high pressure, applicably in various work condition condition, the spot number show,the signal Far EasTone Telecommunications Co., Ltd and permit
Three:Product type
1:Press to calculate a way for cent:Have the physical volume discharge type and the quality discharge type two.
2:Press to install the conjunction method for cent:Quickly pack type, the bore plank takes to press the wreath body to clip to pack in the craft piping two of the method , the method conjunction type:The flowmeter a rightness of methods and the craft piping method  to connect.
Four:Technique parameter
Specification:(the piping path)DN25~DN1000(mm)
Measure accuracy:± 1.0% FSs
Scope degree:Standard 13:1, expand 20:1 and 30:1 and 40:1
The work pressure:≤ 26.0 MPas
Lie quality temperature:-40 ° C ～s 450 ° Cs
Lie a sticky degree of quality:The ≤ 30 cps(equal  to heavy oil,kerosene)
The β be worth:0.2-0.8(the Cape connect to take to press a way)(β =d/D), d:Bore plank bore path;D:Path inside the piping
Link a way:Clip the pack type or the method  conjunction type
The method connects the type method specification with standard:DN 25~ DN1000s;
PN0.25~PN2.5, JB/T81 - 94, the convex front-panel type even steel system tube method ;PN2.5~PN4.0, JB/T82.1 - 94, convex face the steel system tube method (high neck);PN4.0~ PN20.0s, JB/T82.2 - 94, cave and convex face the steel system tube method (high neck);The PN is 20~ PN26s, HG20216 - 97
Or choose to use other method standards:
Material:The bore plank, take to press wreath, take to press a tube, three:Various stainless steel card;
Keep the tube segment and conjunction method :The carbon steel or stainless steel.(allow to choose)
Install a way:The level piping or perpendicular piping
Differ to press to change to send a machine:
· exportation:4~20 mA.DCs or pulse signal;Take the HART agreement;(can choose)
· power supply power supply:24V.DC;
· protection grade:IP66;
· flameproof type flameproof grade:The CT4 - 6 of d Ⅱ , the CT4 - 6 of ia Ⅱ ;
The · form head show:The blind form(have no manifestation) shows table two with number.
Five:Discharge nasty structure
1:Basic structure
The HZKL series integral whole turns the bore plank flowmeter, is take by the bore plank to press device,three the valve set and differ to press to change to send a machine three greatly part of constitute.
2:Bore plank type
Standard bore plank
3:Take to press a way
The · clips a pack type:The Cape connects to drill a hole to take to press
· method type:The method takes to press
4:Three valve set and its function:
The · can make the integral whole turn structure firm, reduce to reveal a point;
· can the on-line confirmation change zero:00 and the correction of send the machine;
· can on-line check or replace to differ to press to change to send a machine, operate very convenient.
5:Differ to press to change to send a machine:Can choose to use according to the dissimilarity of the function need 1151,3051,3095,the EJA,FX2,FCX-A/C and  ST3000 type etc. of  .